View A015AN01V2_1564613.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

spec. no. 413-212-105 doc. version : 0 total pages : 19 date : 2001.10.15 note: the content of this specification is subject to change. ? 2001 au optronics all rights reserved, do not copy. model name: a015an01 ver.2 (up015d02-1 ) product specification 1.5 color tft-lcd module < >preliminary specification www..net www..net
record of revision version revise date page content 1 30/oct./2001 first draft. www..net www..net
413-212-0 version : 0 page : 1 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. contents: a. physical specification ..................................................... p3 b. electrical specifications ................................................... p4 1. pin assignment ............................................................ p4 a.tft-lcd panel driving section ........................................... p5 b.backlight driving section ................................................. p5 2. a bsolute maximum ratings .................................................. p5 3. electrical characteristics .................................................... p6 a. typical operating conditions ............................................. p6 b. current consumption .................................................... p6 c. backlight driving conditions ......................................... p6 4. ac timing ............................................................... .. p7 a. timing conditions ....................................................... p7 b. timing diagram ......................................................... p7 c. optical specifications ..................................................... p8 d. reliability test items ....................................................... p10 e. packing form ............................................................... p11 www..net www..net
413-212-0 version : 0 page : 2 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. appendix: fig.1 outline dimension of tft-lcd dl p12 fig.2 sampling clock ti i p13 fig.3 horizontal display timing range (normal scanning d) p14 fig.4 - (a) horizontal ti i p15 fig.4-(b) detail horizontal ti i p16 fig.5 vertical shift clock ti i p17 fig.6-(a) vertical timing (normal scanning d) p18 fig.6-(b) vertical timing (reverse scanning d) p19 www..net www..net
413-212-0 version : 0 page : 3 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. a. physical sp ecifications no. item specification remark 1 display resolution(dot) 280(w) 220(h) 2 active area(mm) 29.54(w) 22.22(h) 3 screen size(inch) 1.45(diagonal) 4 dot pitch(mm) 0.1055(w) 0.101(h) 5 color configuration r. g. b. delta 6 overall dimension(mm) 39.55(w) 32.6(h) 4.0(d) note 1 7 weight(g) 10 typ. note 1: refer to fig. 1 www..net www..net
413-212-0 version : 0 page : 4 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. b. electrical specifications 1.pin assignment a. tft-lcd panel driving section pin no symbol i/o description remark 1 gnd - ground for logic circuit 2 v cc1 i supply voltage of logic control circuit for scan driver 3 v gl i negative power for scan driver 4 v gh i positive power for scan driver 5 stvr i/o vertical start pulse note 1 6 stvl i/o vertical start pulse note 1 7 ckv i shift clock input for scan driver 8 u/d i up/down scan control input note 1,2 9 oev i output enable input for scan driver 10 vcom i common electrode driving signal 11 vcom i common electrode driving signal 12 l/r i left/right scan control input note 1,2 13 q1h i analog signal rotate input 14 oeh i output enable input for data driver 15 sthl i/o start pulse for horizontal scan line note 1 16 sthr i/o start pulse for horizontal scan line note 1 17 cph3 i sampling and shifting clock pulse for data driver 18 cph2 i sampling and shifting clock pulse for data driver 19 cph1 i sampling and shifting clock pulse for data driver 20 v cc2 i supply voltage of logic control circuit for data driver 21 gnd - ground for logic circuit 22 vr i alternated video signal input(red) 23 vg i alternated video signal input(green) 24 vb i alternated video signal input(blue) 25 av dd i supply voltage for analog circuit 26 av ss - ground for analog circuit note 1: selection of scanning mode www..net www..net
413-212-0 version : 0 page : 5 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. mode setting of scan control input in/out state for start pulse scanning direction u/d l/r stvr stvl sthr sthl normal mode l h out in out in from up to down, and from left to right. reverse mode h l in out in out from down to up, and from right to left. in: input; out: output. note 2 : definition of scanning direction. refer to figure as below: b. backlight driving section (refer to fig.1) no. symbol i/o description remark 1 hi i power supply for backlight unit (high voltage) 2 gnd - ground 2. absolute maximum ratings item symbol condition min. max. unit remark power voltage v cc gnd=0 -0.3 7 v v cc1 , v cc2 av dd av ss =0 -0.3 7 v v gh gnd=0 -0.3 21 v v gl -17 0.3 v v gh v gl - 33 v input signal voltage v i -0.2 v cc +0.2 v note 1 v i -0.3 v cc +0.3 v note 2 vcom -2.9 5.2 v operating temperature topa 0 60 ambient temperature storage temperature ts t g - 2 5 8 0 ambient temperature backlight voltage v l -0.3 v note 1: vr, vg, vb. www..net www..net
413-212-0 version : 0 page : 6 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. note 2: sthl, sthr, q1h, oeh, l/r, cph1~cph3, stvr, stvl, oev, ckv, u/d. 3. electrical characteristics a. typical operating conditions (gnd=avss=0v) item symbol min. typ. max. unit remark power supply v cc 3 5 5.2 v v cc1 ; v cc2 av dd 4.8 5 5.2 v v gh 13.5 15 16.5 v v gl ac - 5.6 - vp-p ac component of v gl. note 1 v gl h -11 -10 -9 v high level of v gl. video signal amplitude (vr,vg,vb) v ia av ss +0.4 - av dd -0.4 v note 2 v iac - 3 3.8 v ac component v idc - av dd /2 - v dc component vcom v cac - 5.6 - vp-p ac component, note 3 v cdc 0.45 0.75 1.05 v dc component,note 4 input signal volta g e h level v ih 0.8v cc - v cc v note 5 l level v il 0 - 0.2v cc v note 1: the same phase and amplitude with common electrode driving signal (vcom). note 2: refer to fig.4 - (a). note 3: the brightness of lcd panel could be adjusted by the adjustment of the ac component of vcom. note 4: v cdc could be adjusted so as to minimize vertical straight line, flicker and maximum contrast on each module. note 5: sthl, sthr, q1h, oeh, l/r, cph1~cph3, stvr, stvl, oev, ckv, u/d. note 6: be sure to apply gnd, v cc and v gl (v gl must lower than 0 volt) to the lcd first, and then apply v gh . b. current consumption (gnd=avss=0v) parameter symbol condition min. typ. max. unit remark current for driver i gh v gh =15v - 0.3 0.8 m a i gl v gl _ h =-10v - -0.6 -1 m a i cc v cc =5v - 0.8 2 m a v cc1 ; v cc2 i dd av dd =5v - 2.5 8 m a c. backlight driving conditions parameter symbol min. typ. max. unit remark backlight current 18 ma backlight voltage v l (12.5) v led life time l l 10000 hr note 1,2 note 1 : ta. = 25 , i l = 18ma note 2 : brightness to be decreased to 50% of the initial value. 4. ac timing www..net www..net
413-212-0 version : 0 page : 7 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. a. timing conditions parameter symbol min. typ. max. unit. remark rising time t r - - 10 ns note 1 falling time t f - - 10 ns note 1 high and low level pulse width t cph 450 500 550 ns cph1~cph3 cph pulse duty t cwh 40 50 60 % cph1~cph3 cph pulse delay t c12 t c23 t c31 70 t cph /3 t cph /2 ns cph1~cph3 sth setup time t suh 70 - - ns sthr,sthl sth hold time t hdh 350 - - ns sthr,sthl sth pulse width t sth - 1 - t cph sthr,sthl sth period t h 61.5 63.5 65.5 www..net www..net
413-212-0 version : 0 page : 8 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. c. optical specification (n ote 1,note 2, note 3 ) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 - - 25 30 50 60 ms ms note 4 contrast ratio cr at optimized viewing angle 60 150 - note 5,6 viewing angle to p bottom left right cr R 10 10 30 45 45 - - - - - - - - deg . note 7 brightness y l =0 210 230 - cd/m 2 note 8 white chromaticity x =0 0.27 0.31 0.35 y =0 0.30 0.35 0.40 note 1. ambient temperature =25 . and backlight current i l =18 ma note 2. to be measured in the dark room. note 3.to be measured on the center area of panel with a field angle of 1 by topcon luminance meter bm-7, after 10 minutes operation. note 4. definition of response time: the output signals of photo detector are measured when the input signals are changed from ?black? to ?white?(falling time) and from ?white? to ?black?(rising time), respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. refer to figure as below. note 5. definition of contrast ratio: contrast ratio is calculated with the following formula. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% www..net www..net
413-212-0 version : 0 page : 9 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. photo detector output when lcd is at ?white? state photo detector output when lcd is at ?black? state note 6. white vi=v i50 1.5v black vi=v i50 2.0v ? ? means that the analog input signal swings in phase with com signal. ? ? means that the analog input signal swings out of phase with com signal. v i50 : the analog input voltage when transmission is 50% the 100% transmission is defined as the transmission of lcd panel when all the input terminals of module are electrically opened. note 7. definition of viewing angle: refer to figure as below. note 8. measured at the center area of the panel when all the input terminals of lcd panel are electrically opened. contrast ratio (cr)= www..net www..net
413-212-0 version : 0 page : 10 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. d. reliability test items: no. test items conditions remark 1 high temperature storage ta = 80 200v,200pf(0 ), once for each terminal non-operation 8 vibration frequency range : 10~55hz non-operation jis c7021, a-10 condition a stoke : 1.5mm sweep : 10~55hz~10hz 2 hours for each direction of x,y,z (6 hours for total) 9 mechanical shock 100g . 6ms, x, y, z 3 times for each direction non-operation jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz ? 6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 60cm 1 corner, 3 ed g es, 6 surfaces note: ta: ambient temperature. www..net www..net
413-212-0 version : 0 page : 11 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. e. packing form www..net www..net
413-212-0 version : 0 page : 12 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. fig.1 outline dimension of tft-lcd module u l 3 3 0 2 3 0 v a w g 3 2 u l 3 3 0 2 3 0 v a w g 3 2 g n d h i 2 6 1 1 26 www..net www..net
413-212-0 version : 0 page : 13 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 5 0 % 5 0 % 1 0 % 1 0 % 9 0 % 9 0 % s t h l ( r ) c p h 1 c p h 2 c p h 3 s t h t s u h t t h d h c 1 2 t t c 3 1 t c 2 3 c p h t t c w h t r f t www..net www..net
413-212-0 version : 0 page : 14 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. s t h l ( i n p u t ) s t h r ( o u t p u t ) c p h 1 t d h s h t www..net www..net
413-212-0 version : 0 page : 15 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. o e h o e v v c o m 1 h t h v c d c c a c v c a c v v i d c b l a n k b l a c k v i a v i a c w h i t e b l a c k b l a n k w h i t e ( h s y ) s t h l ( r ) q 1 h v c k v g l r ( g b ) v v gl _ h v gl _ ac www..net www..net
413-212-0 version : 0 page : 16 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. o e h o e v v c o m ( h s y ) s t h l ( r ) q 1 h v c k v g l r ( g b ) v 1 h t d i s 2 o e h t t d i s 1 t s t h t o e v t c k v t f c o m 1 0 % 9 0 % 9 0 % 1 0 % 1 0 % 9 0 % 5 0 % 5 0 % 1 0 % 9 0 % t d c o m t r c o m t d r g b www..net www..net
413-212-0 version : 0 page : 17 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. s t v r ( l ) c k v 5 0 % 5 0 % t s u v h d v t t c k v www..net www..net
413-212-0 version : 0 page : 18 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. v c o m ( e v e n f i e l d ) v c o m ( o d d f i e l d ) s t v l ( v s y ) q 1 h d i s p l a y o n p a n e l f i r s t l i n e v r ( g b ) ( h s y ) t s v fig.6-(a) vertical timi ng (from up to down) www..net www..net
413-212-0 version : 0 page : 19 / 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. v c o m ( e v e n f i e l d ) s t v r ( v s y ) q 1 h d i s p l a y o n p a n e l f i r s t l i n e v r ( g b ) ( h s y ) t s v v c o m ( o d d f i e l d ) fig.6-(b) vertical timing (from down to up) www..net www..net

▲Up To Search▲

Price & Availability of A015AN01V2

	To Download A015AN01V2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .